DEWALT DWE7485 vs DWE7491RS: Which Table Saw Fits Your Shop?

Price — The DWE7485 is the budget winner

The DWE7485 costs around half the price of the DWE491RS, saving. For a mobile contractor just starting out or a hobbyist with limited funds, that price difference can cover a quality aftermarket blade, a dado set, and a shop‑vac hose. The DWE7491RS’s higher cost pays for the stand, larger blade, and extra capacity — but only if you’ll use them regularly.

Prioritize the DWE7485 if your budget is tight and your projects rarely exceed 24-inch rips. The savings let you invest in other essential tools without sacrificing the smooth rack‑and‑pinion fence both saws share.

Choose the DWE7491RS if you view the extra cost as an investment in long‑term capacity. The 10‑inch blade and integrated stand add value that will pay off every time you roll the saw out for a large panel project.

Blade Size — 10 inches unlocks more versatility

The DWE7491RS runs a full 10‑inch blade versus the 8‑1/4‑inch blade on the DWE7485. A 10‑inch blade provides a deeper cut, accepts a wider range of aftermarket blades, and can be used with many zero‑clearance inserts and tenoning jigs. The smaller blade still cuts cleanly but limits you to shallower work and a narrower selection of specialty blades.

If you build furniture, cabinets, or jigs that rely on a 10‑inch blade profile, the DWE7491RS is the only choice. Standard dado stacks and many molding heads are designed for 10‑inch saws, so you avoid compatibility headaches.

The DWE7485’s 8‑1/4‑inch blade is fine for general carpentry and trim work. It spins at 5,800 RPM and, paired with a quality thin‑kerf blade, makes fast, glue‑ready cuts in sheet goods and hardwoods up to about 2 inches thick.

Rip Capacity — The DWE7491RS swallows full sheets

With 32‑1/2 inches of rip capacity, the DWE7491RS outpaces the DWE7485 by a full 8 inches. That means you can cut a 4x8 sheet of plywood lengthwise right out of the box without needing an auxiliary table or roller stand. The DWE7485’s 24‑1/2‑inch capacity can still crosscut a 4-foot sheet but requires extra support for long rips.

For kitchen installers and cabinet shops, the extra capacity translates to faster workflow and fewer setup steps. You slide a full sheet on one side, make the cut, and move on — no wrestling with flimsy outfeed rollers.

Weekend DIYers who mostly cut narrower stock won’t miss the extra width. If your typical project involves 2x4s, 1x6s, or half‑sheets of plywood, the DWE7485 handles them easily while keeping your workspace less cluttered.

Depth of Cut — The DWE7491RS powers through thick stock

The DWE7491RS’s 3‑1/8‑inch cut depth at 90° easily handles 4x4 posts and 8/4 hardwoods in a single pass. The DWE7485’s 2.5‑inch depth means you’ll need to flip thicker material, which can introduce alignment errors and tear‑out. For dense species like maple or oak, the deeper cut also reduces motor strain by taking smaller bites per revolution.

If you regularly build workbenches, deck posts, or large cutting boards, the larger saw saves time and frustration. Flipping a 4x4 mid‑cut is never perfectly accurate, and the risk of kickback increases when you have to reset the material.

For thinner stock — 2x lumber and plywood — both saws perform equally well. The DWE7485 delivers clean cuts in 3/4‑inch sheet goods and dimensional lumber without hesitation, so you only need the deeper capacity if your projects demand it.

Weight — The DWE7485 is a one‑person carry

At 54 pounds, the DWE7485 is light enough for one person to lift into a truck bed or up a flight of stairs. The DWE7491RS with its stand tips the scales at 110 pounds — while you can roll it on the wheels, lifting it solo is awkward. For a contractor who makes multiple stops a day, the weight difference directly impacts end‑of‑day fatigue.

Portability isn’t just about lifting — it’s about storage footprint. The compact DWE7485 slides under a workbench or into a tight corner; the larger saw demands a dedicated spot and a clear path to roll it out.

If your saw lives in one spot, the weight doesn’t matter. The DWE7491RS’s stand makes it easy to reposition within a garage, but if you rarely move it, the extra mass adds stability and vibration damping, which actually improves cut quality.

Stand Included — The DWE7491RS comes ready to work

The DWE7491RS bundles a heavy‑duty rolling stand that sets up in seconds and folds just as fast. The DWE7485 must be purchased with a separate stand (+), or you’ll need to build a dedicated bench or carry saw horses. Having the stand included simplifies setup and ensures compatibility — no wobble or height mismatch.

Mobile pros who already own a universal stand or use a tailgate may not need the extra accessory. But for anyone starting from scratch, the integrated stand eliminates the guesswork and extra research, letting you get cutting sooner.

The stand also doubles as a material support and storage cart. Its large wheels handle job‑site debris, and the folded package takes up less space than a separate saw and stand combo, making it ideal for crowded work vans.

Dust Collection — The DWE7491RS connects directly to a shop vac

A built‑in 2‑1/2‑inch dust port on the DWE7491RS connects straight to a standard shop‑vac hose. The DWE7485 lacks a dedicated port, so you’ll need to fabricate an adapter or rely on a separate dust collection system. For indoor or finished spaces where airborne dust is a health concern, the easier dust collection is a real advantage.

Even with a vacuum attached, no jobsite saw is dust‑free. Both saws benefit from a dust‑stoppering bag or a cyclonic separator for heavy use, but the DWE7491RS captures more debris right at the blade, keeping the motor housing and your lungs cleaner.

Choose the DWE7491RS if you work in enclosed garages or occupied homes. The DWE7485 still cuts effectively, but the finer dust can linger longer and require more frequent cleanup — a small frustration that adds up over a long project.

Warranty — The DWE7491RS offers triple the coverage

DEWALT backs the DWE7491RS with a 3‑year limited warranty, compared to the standard limited warranty on the DWE7485. While both saws are built to last, the longer warranty signals DEWALT’s confidence in the larger saw’s components under heavier use. For a contractor who relies on the saw daily, that extra coverage could mean the difference between a free repair and a costly replacement.

Either saw is likely to outlast the warranty period with proper maintenance. Clean the fence rails regularly, check the blade alignment, and store it in a dry environment. The rack‑and‑pinion fence system on both models is famously durable and stays accurate with minimal adjustment.

If you plan to pass the saw on or resell it, the transferable 3‑year warranty on the DWE7491RS adds value. It’s a small detail that makes the larger saw more attractive to a future buyer and protects your investment longer.